Automatic Dryer
Model：ENA-25S
Multi-function Dry and Safety
- Clockwise and counterclockwise rotation of the internal tub is computer controlled.This is combined with a frequency inverter control, providing 6-step speed of internal tub to reduce tangle of dry clothes.
- A humidity sensor is applied to monitor the dry condition and prevent clothes from shrinking.
- Equipped with 2 types if drying and cooling timers, allowing the machine to perform 2-step drying and cooling motions according to clothes types.
- Incase abnormal temperature occurs, a buzzer will sound for safety protection.
- The door is equipped with a safety switch.This prevents operator from damage caused by door opening when the machine is running .
- Allows for 2-step processing.
Excellent Durability and Quietness
The steel plate of external housing is paint-baked and anti-rust treated. The internal barrel is manufactured from stainless steel with special structure design, featuring excellent durability. The machine exhibits significantly lower noise than competitive models.
Outstanding Operational Performance
The entire structure height is designed to meet ergonomics for convenient operation. Once you place clothes into the machine, simply select your desired drying mode and start the computer, then the machine will perform fully automatic operation.
Extra Large Capacity High Efficiency Drying
The over-sized internal barrel is suitable for drying lots of clothes. The interior of the machine is designed with turbulent type convention port, which is combined with the use of 4 agitating rods for ventilation and fast drying of clothes.
- SPECIFICATIONS
|
Mode |
ENA-25S |
||||
|
Loading(kg) |
25kg |
Pipe | Steam |
1/2" |
|
| Steam consumption |
55 kg/hr |
Cooling water |
1/2" |
||
|
Drum |
Diameter(mm) |
900 mm |
Air |
* |
|
|
Depth(mm) |
800 mm |
Required steam pressure |
4.0～6.0 kg/cm2 |
||
| Capacity(Liter) |
508L |
Air consumption |
* |
||
| R.P.M |
38rpm |
Duct pipe |
Φ200mm |
||
| Punch hole |
Φ6mm |
Power supply |
3ph 220v/380v 50/60Hz |
||
|
Air flow |
25m3/min |
Distributed electricity |
2.0 mm2/2.0mm2 |
||
| Door dimension | Front |
Φ560mm |
Maximum current |
6A/4A |
|
| Rear |
* |
Breaker |
15A/15A |
||
| Controlled by |
CS-168 |
Dimension |
1020Wx1290Dx1880H |
||
| Motors | Drum motor |
0.4 kw×6P |
Net weight |
460 kg |
|
| Blower |
0.75 kw×4P |
||||
|
Total capacity |
1.15kw |
||||